Balmoral SBR
The Balmoral Sequential Batch Reactor (SBR) combines the efficiency of activated sludge aeration with batch treatment to provide exceptional effluent quality even under extreme loadings.
In common with all Balmoral products, no compromise is made with regard to quality or design and the advanced technology and materials used in the manufacture of the SBR will ensure a lifetime of reliable service with the very minimum of maintenance.
The Balmoral SBR has been designed and built by Balmoral Tanks in association with the University of Abertay, Dundee, Waste Water Technology Centre, who acted as external consultants. The university carried out an in-depth test programme during which the SBR was tested and evaluated alongside a leading competitors model.
The aim of the development programme was to design a unit which was not only very robust and reliable but which would provide outstanding effluent quality without the need for expensive “add on” equipment and would also overcome technical problems - (such as media clogging and peak surges through the bio-zone), which most current designs have failed to adequately address.
The final report from the WWTC confirms that the Balmoral SBR out-performs its rivals in almost every respect and that it has the capability to meet even the most onerous effluent requirement.
Product construction
The Balmoral SBR is rotationally moulded in one-piece from an advanced high density polyethylene material, which offers exceptional durability and impact resistance.
The air compressor unit is an oil free diaphragm (6 and 12 pop) or a rotary vane type (18 pop upwards). The electronic controller uses the latest solid state technology and is pre-programmed to the required cycle times.
-
--
